Our Range

Read More
Alignment Of Parisons During Small Bottle Manufacture

Alignment Of Parisons During Small Bottle Manufacture

Small extrusion heads positioned close together result in high deflection rates in the parisons and low yield due to pinching by the mould.
Read More
CD & DVD Delamination During Manufacture

CD & DVD Delamination During Manufacture

By charging 1 disk to the opposite polarity using a 993R Bar, perfect bonding is achieved.
Read More
Cleaning UPVC Profile Extrusion After Machining Or Pre Decoration

Cleaning UPVC Profile Extrusion After Machining Or Pre Decoration

Warm and highly charged profiles become heavily contaminated by swarf after the saw station. This can lead to:
Read More
Contamination Control For Door Seal Manufacturing

Contamination Control For Door Seal Manufacturing

Extruded rubber used for automotive applications such as door seals, have contamination issues.
Read More
Contamination Control in Thermoforming

Contamination Control in Thermoforming

Sheet materials need to be free of contamination and plastic swarf, prior to entry to the thermoforming machine
Read More
Contamination Control on Injected Moulded Products

Contamination Control on Injected Moulded Products

Positioning a Meech 971IPS bar at the end of the conveyor near the robot set down, allows the product to pass through the ionising field,...
Read More
Conveying Plastic Granules Activating Metal Detector

Conveying Plastic Granules Activating Metal Detector

Transferring the granules through ducting results in electrostatic discharges. These discharges will activate a metal detector.
Read More
Conveyor Problems With Plastic Blow Moulded Bottles

Conveyor Problems With Plastic Blow Moulded Bottles

Blow moulded plastic containers such as shampoo bottles can experience problems at the packing station such as:
Read More
IML Decoration Of Plastic Moulds Using Static Pinning

IML Decoration Of Plastic Moulds Using Static Pinning

Pinning the label in-situ using static electricity, avoids complicated design issues and provides an excellent temporary bond.
Read More
Mouldings Sticking To Tool Face During Injection Moulding

Mouldings Sticking To Tool Face During Injection Moulding

Small, light mouldings can stick to the face of the tool due to static charge. This can result in mould damage and slower production speeds.
Read More
Neutralising Static Generated While 3D Printing

Neutralising Static Generated While 3D Printing

Static generated on the model powder during printing can cause mixing with the support material.
Read More
Operator Shocks During Electrical Cable Manufacturing

Operator Shocks During Electrical Cable Manufacturing

Plastic sleeving coating the conductors give rise to health and safety issues due to electrostatic shock stored in the copper conductors
Read More
Operator Shocks In Tyre Manufacture

Operator Shocks In Tyre Manufacture

Rubber is extruded onto a carrier belt to cool. Separation of the rubber from the carrier generates massive static charges.
Read More
Print Quality Problems With Ink Jet Printing On UPVC Extrusion

Print Quality Problems With Ink Jet Printing On UPVC Extrusion

High voltage static charges generated on uPVC profile during the extrusion process present a number of problems for ink jet printing systems:
Read More
Static Problems Causing Blow Moulding Parison Misalignment

Static Problems Causing Blow Moulding Parison Misalignment

As molten plastic parisons drop towards an open tool, high static charges cause the following problems:
Read More
Swarf & Contamination Control On Extruded Plastics

Swarf & Contamination Control On Extruded Plastics

Swarf and environmental contamination will be attracted to the surface of the product.