Hyperion 907 Power Supply
Product Code: 907
The Hyperion 907 is an advanced AC power supply. It is compatible with all Meech AC Ionisers. Powered by 24V DC, it produces an adjustable output of up to 7kV AC.
The electronic drive circuit features Ion Current Monitoring. This provides the operator with local and remote alerts to clean the ionising equipment - Cleaning is a vital maintenance operation to ensure good ionisation performance. A further benefit of the electronic control is adjustable output balance which, for the first time, allows the use of AC ionisers on sensitive electronics applications.

Features & Benefits
Technical Characteristics
Images
Features & Benefits
24V Input Voltage
Universal supply voltage, found on modern machinery, Hyperion 907 can operate independently of local mains voltage and frequency.
Adjustable AC Output
Output voltage of between 4 and 7kV can be set (with BarMaster programmer). This means the Hyperion 907 can be set up to suit any Meech ioniser, making it truly universal.
Universal Meech HT Connection
Up to four standard Meech AC products can be connected to a single power unit, without any modification.
Twin Red/Green LED’s
Easy to see LED indicators ensure the state of the power unit can be viewed at any angle. The colour and state of the LEDs, show whether the system is operating correctly or if it needs attention.
HT Failure Alert
Local and remote alert of damage or HT failure.
Clean Pin Alert
Local and remote instruction to clean the bar. The LED will illuminate to indicate the system is on, working correctly and giving good ionisation performance. A change to a flashing red LED shows Meech’s Ion Current Monitoring (ICM) technology has detected that the bars need cleaning.
Spark Detection
The spark detection system will detect any problem as it happens and alert the operator by a fast flashing LED. The alert can also be monitored remotely via the alarm signal wire.
Balance Adjustment
For critical electronic applications the offset voltage that is found on AC bars can potentially cause failures of integrated circuitry. The ability to remove this offset voltage with the 907 and deliver precise neutralisation means that AC bars can be used on applications that, previously, they were unsuitable for.
Technical Characteristics
Dimensions (WxHxD)
92mm x 110mm x 118mm
Weight
2.2kg
Construction
Painted Steel
Input Current
200mA-850mA Load Dependant
Input Voltage
24V DC - N.B. Supply must be grounded.
Output Voltage
Adjustable, 4 to 7kV AC
Output Frequency
67Hz
Connection
Murr 4 pin M8, Earth terminal
Settings Control
BarMaster
Output Signal
24V, Output Resistance 10kΩ
Local Indication
Twin Green/Red LEDs