Our Range
Read More
Air curtain drying
Drying shrink sleeved containers after steam tunnel PROBLEM Shrink sleeved containers exiting a steam tunnel are covered with moisture. Prior to...
Read More
Blow moulding – Parison alignment – limited space
PROBLEMWhere there is limited space between the extrusion heads and the top of the tooling, placing and ionising bar to control the static charges...
Read More
Bottle bagging or stacking
PROBLEM Static charges generated during bottle transfer can result on bottle repelling form each other and falling over during bagging. SOLUTION...
Read More
Bottle date code
Static Issues During Inkjet Date Coding PROBLEM Dusty or statically charged products cause issues when date or batch coding, using inkjet...
Read More
Bottle drying or cleaning
PROBLEM The exterior of containers exiting filling or pasteurising may be contaminated by liquids or water from the pasteuriser. This would make...
Read More
Bottle labelling & collation
PROBLEM Static charges generated by adhesive separation from silicone release liner cause label creasing or misalignment on the container. Static...
Read More
Bottle neutralisation
PROBLEM Static charges generated on containers and seals during the sonic welding process results in Operator/personnel Shocks from sealing material...
Read More
Bottle overwrapper
Wrapping & Contamination Problems with Bottle Overwrapper Wrap Machine PROBLEM There are 3 areas of concern with this type of packaging...
Read More
Bottle Tamper Seal
PROBLEM Tamper sleeve and bottle sleeving are prone to the sleeve not sitting in the correct position on the container. This is caused when the...
Read More
Container – sonic weld sealing
PROBLEM Static charges generated on containers and seals during the sonic welding process results in operator/personnel shocks from sealing material...
Read More
Filling weighing sealing bottles
PROBLEM Static charges generated on bottles prior to filling can cause issues with Contamination on the bottle neck, resulting in sealing...
Read More
Hot melt labelling
PROBLEM Label stock entering into the label applicator can become highly charged on the lead and trail ends of the label. This will result in: ...
Read More
Ionrinse blown preform bottles
PROBLEM Static charges generated on preforms during the injection moulding process attracts contamination to the preform during storage, transfer and...
Read More
Jetstream bottle drying
PROBLEM There are 4 areas of concern with this type of packaging machine: Wet undersides of cans cause problems when laser or ink jet printing...
Read More
Pallet Wrapper
Static Issues During Pallet Wrapping PROBLEM Pallet wrapping causes a few problems dependant on the product that’s being wrapped. Areas...
Read More
Shrink sleeve
Static Control on Shrink Sleeving Preventing Label Alignment Issues PROBLEM Bottle sleeving is prone to the sleeve not sitting in the correct...
Read More
Stretchhood Wrapper
Static Control on Stretch Hood Palletiser Preventing Misfeeding PROBLEM The blocking in the material caused during the production of the lay-flat...
Read More
