924S Pulsed DC Ionising Bar
Product Code: A924S
The Meech 924S ionising bar has been designed to provide highly effective short-range ionisation using Pulsed DC Technology. It is particularly suited for use on wide format digital printers. At 32mm high by 22mm wide it is extremely compact and designed specifically to provide a solution that works effectively for manufacturers of wide format inkjet printers.
The 924S DC Bar provides ionisation through alternating positive and negative emitter pins mounted in an FR ABS extrusion. The titanium emitter pins are resistively coupled to the high voltage pulsed DC source, rendering the emitters shockless to touch and offering many years of service.
When powered by a 233v4 Pulsed DC Controller, the system gains the advantage of Hyperion technology; allowing remote programming and monitoring of the bar’s performance.
DownloadFeatures & Benefits
For controlled and optimised ionisation
Allows easy installation onto the print-head
Safe to handle and extremely long-lasting
Maximises performance between cleaning operations
Easy mounting
Technical Characteristics
22 x 32 x see length
80mm – 3960mm
1 x 10mm
FR ABS
60°C
‘T’ Slot with M4 studs
Twinned TV20
2000mm Longer on request
Grey HT male plugs
Default: 20Hz (Adjustable with BarMaster)
233v4
20-200mm
0.5 < 1 sec at 150mm
IP68
Less than 0.01ppm
Up to 8kV
Applications
Images
Related Products
Test Kit – 983v2 & 984v2
Product Code: 983V2-984V2-KIT
The 983v2 & 984v2 test kit allows diagnosis of static related issues and ionising equipment performance monitoring.
Must Haves
Switchmode Power Adaptor 15W
Product Code: A900IPS-SM2MS
Meech Offer a suitable Switchmode Power Adaptor for the Hyperion 924IPS, 924IPSv2, 314IPS, 960IPS, 971IPS-30 and 650QAC Bars.
PulseDrive Lite PDC Controller
Product Code: APD15-LITE-00
The Hyperion PulseDrive Lite is an OEM-friendly controller with local status indication and a single pair of positive and negative HV outputs.
A single ioniser can be connected directly, or multiple ionisers connected using Meech HV splitters.
Also, being a Hyperion product, there is the ability to adjust output parameters via the use of a BarMaster or SmartControl Touch. SmartControl Touch compatibility also provides enhanced, integrated monitoring and control.
PulseDrive Plus PDC Controller
Product Code: APD15-PLUS-00
The Hyperion™ PulseDrive Plus is a static elimination controller that uses advanced pulsed DC technology to control Meech ionisers.
Firstly, a front-panel keypad provides local adjustment of parameters, allowing performance optimisation for output voltage up to 15kV, frequency for range, and balance for speed and accuracy. With adaptable parameters, PulseDrive ensures that any Meech DC ioniser can be setup and optimised to suit any requirement.
In addition, the PulseDrive Plus has many key features including LEDs to indicate operation status and ion current monitoring technology for greater control of the ionisation performance.
Furthermore, PulseDrive is compatible with our remote programmers, Hyperion™ BarMaster and Hyperion™ SmartControl Touch, enabling smarter and more effective static management.
Two pairs of HV outputs allow two ionisers to be connected, however with Meech HV Splitters, multiple ionisers can be connected.
Finally, the PulseDrive Plus is also available in two other versions for use in hazardous locations, PulseDrive Plus HL 5.5kV and PulseDrive Plus HL 9.0kV. These are ideal for use with our 924EX and 976EX Static Eliminator bars.
.
