EX Cabinet Cooler
Product Code: A70025EX-SS303 and A70025EX-SS316
The IP66 EX Cabinet Cooler is suitable for cooling cabinet/panels in hazardous locations.
The Meech EX Cabinet Cooler uses compressed air to provide a cold air source that stops industrial cabinets/panels or enclosures in hazardous locations from overheating. The Meech EX Cabinet Cooler is suitable for installation in category 2 (Zone 1), T4 locations, where ATEX or IECEx certification is required.
This IP66 rated model is both dust tight and protected against powerful water jets. Meaning water projected in powerful jets against the enclosure from any direction shall have no harmful effects.
Prior to the IP test the Cabinet Cooler was also subjected to three climatic pre-conditioning tests. These tests proved the integrity of the Cabinet Cooler after it had been subjected to temperatures of 90°C for a duration of 672 hours. Following this the cooler was subjected to further temperature endurance test. These tests were carried out in accordance with IEC60079-0:2017.
The Cabinet Cooler has no electrical/electronic components making them entirely non-electrical. The cooling is provided from a Vortex Tube located inside the cooler. The Cabinet Cooler creates both a hot and cold stream of air, the cold air is directed inside the enclosure whilst the hot air is released to the atmosphere via two holes located in the side of the Cabinet Cooler.
The device is supplied with 4 x Generators that are used to regulate both the air consumption and air temperature. The Yellow 10CFM, Red 15CFM, Blue 25CFM and Brown 35CFM Generators can be easily switched to suit different conditions or applications.
The Cooler can be mounted to the directly to the top, side or underneath of the enclosure via a 26mm diameter hole. An O-ring seal between the Cabinet Cooler and the enclosure wall maintains the integrity of the enclosure. This model Cabinet Cooler is IP66 rated.
The Cabinet Cooler is available in both Stainless Steel grades 303 and 316, allowing it to be used in a wide variety of applications.
Product Codes
EX Cabinet Cooler Unit – IP66 Category 2 (Zone1), T4 applications, in SS303 – A70025EX-SS303
EX Cabinet Cooler Unit – IP66 Category 2 (Zone1), T4 applications, in SS316L- A70025EX-SS316
DownloadFeatures & Benefits
Small Size allows installation into Small spaces
Reduced Maintenance
Supplied with 4 x Generators to control air volume and temperature
73dBA with red generator at 80 psi (5.4 Bar)
Cooler creates positive pressure inside cabinet to stop ingress
70% (2.5 Turns from closed)
For use in standard applictions
Ideal replacement for fans that are more commonly used to cool cabinets
Technical Characteristics
(H) 194mm x (W) 45mm
EX Cabinet Cooler unit, 4 x High Fraction Generators and 2.5m of Cooling Tube.
73dBA (@ 80psi, 5.5 Bar), with Red Generator fitted.
190 Watt (650 Btu/hr) to 703 Watt (2400 Btu/hr)
IP66 (Test Certificate Number TRA055426CC01)
80 psi (5.5 Bar)
55°C
Available in either Stainless Steel grade 303 or 316L
Dependant on inlet pressure the cooler will vent air at between 1.5 & 3kPa (0.015 and 0.03 bar)
In accordance with IEC6079-0:2017. Specimen subjected to three climatic pre-conditioning tests
Baseefa16ATEX0042X – Issue 2
IECEx BAS 16,0087X
GB/BAS/ExTR16.0213/00
T4
Group II Category 2 Equipment
Images
Related Products
Cabinet Cooler
Product Code: A70000
Meech Stainless Steel Cabinet Coolers provide a cold air source to stop cabinets overheating and prevent ingress of contamination such as dust or moisture.
