Our Range

1 sided film pinning to aluminum sheet

PROBLEM Automated stacking systems use vacuum to pick up rolled aluminum sheet from the conveyor and place onto a stack ready for transportation. ...

2 sided film pinning to aluminum sheet

PROBLEM Applying a protective film to both sides of metal or glass during processing needs a bonding agent to hold the film in position both sides of...

Bag on a roll

PROBLEM Rewinding bags onto a roll the static charges built up on the material will cause the roll to balloon. This makes the roll larger and less...

Cold roller pinning

PROBLEM Cast plastic film exits from the die in a semi molten (and hot) state directly on to a chill roller. As the plastic cools on the roller, it...

Compensation stacking

PROBLEM Stacks of magazines (as delivered to newsagents) and books are created in compensating stackers. Magazines/books are fed into the...

Core pinning

PROBLEM To prevent machine process stops to change rewinding rolls, a rewind core is wrapped in adhesive tape prior to being held ready to feed...

Electrostatic sorting and removal of impurities from plant processing

PROBLEM Precise alignment of components prior to inspection such as silicone chips by a quality control inspection camera is imperative. Any...

Gusset pinning for carrier bags

PROBLEM Traditional carrier bags are manufactured from a continuous web of material. In some cases, the material is folded to create a gusset along...

Hole detection

PROBLEM Materials intended for use as waterproof membrane can suffer with potential damage or defects during production. Identifying this damage is...

Interleaf laminating nonconductive material

PROBLEM Materials such as glass may require a protective or polarised film to be applied to the surface during production. The prevention or removal...

Label insert pinning

PROBLEM When loose pages are being added to magazines or product prior to packing, they can easily move out of alignment, making poor presentation or...

Laminating embossed aluminum

PROBLEM The embossing process of aluminum creates an uneven surface making applying a protective film more troublesome. Trapped air bubbles on the...

Laminating Formica worktops

PROBLEM Laminated sheets used for furniture etc, are manufactured by attaching one or two laminates to sheets of man-made board (e.g. MDF). A glue...

Peanut chocolate sorting

PROBLEM Processing chocolate or peanuts requires waste product or dust resulting from processing to be removed. Remove for example chocolate...

Plant impurity removal

PROBLEM Removal of stems and other impurities from plant matter during processing or tea, cannabis or other foliage and be time consuming and...

Seam welded bags

PROBLEM When two wide webs are used to form bags on a roll, this can require a slitting and welding process. Alignment of the webs so a weld can be...

Static charging powder glue applicator

PROBLEM During the processing of elastic for clothing a polyurethane adhesive is applied to the elasticated fibres to assist with the production of...

Turret rewind core pinning

PROBLEM Traditional methods of web changes are to use adhesive tape wrapped around the core to bond the lead end of the web to the core during change...

Twin rewind core pinning

PROBLEM More difficult twin rewind machine designs using a twin core in contact with a hard rubber drive roller, use the adhesive tape solution to...

Vinyl record pinning for cutting

PROBLEM The automated disc cutting process requires the vinyl disc to be easily removed but not slip on the turn table during cutting. Automating...

Web Pinning

PROBLEM Controlling multiple web alignments during a production process to ensure exact positioning without damage to the material during separation...