The CyClean R was developed in response to meet the demands for an advanced web cleaning system that can be used on web that sits around the roller. This makes the CyClean-R ideal for use in many applications, especially those with low-tension webs, where CyClean would be ineffective.
To determine the ideal solution for your application you must first gauge your current web tension. Web tension can be determined/quantified by a few ways:
- Visual Inspection for signs of low/high tension
- Use a Tension meter or Load Cell.
- Check for uneven layers on the roll.
- Measure web elongation or stretch.
Each application will require differing levels of tension to suit, and hence Meech offer advanced web cleaning systems to cover all requirements.
How much noise will be produced will largely depend on the size of the manifold and what settings you run it at. The noise levels of the system manifold itself is always quieter than the AHU accompanying it. A 3 Pump AHU will create 72dBA, and a 6 Pump AHU 78dAB, far below the upper exposure limit of 85dBA making them safe to use with no PPE.
The CyClean and CyClean-R can be installed in enclosed work areas with no health and safety issues due to low noise output.
The CyClean and CyClean-R are both optimised to effectively clean at machines speeds of 800m/min, or 2624ft/min.
For applications which exceed this parameter please reach out to your local Meech distributor or contact Meech directly for more assistance.
CyClean can be used in a wide variety of applications and being non-contact means it can be used with all web materials. Applications can include but not limited to:
- Printing
- Coating
- Laminating
- Food and medical packaging
- Speciality film processing
- Battery – aluminium foil
- Blister packs