Our Range
Read More
Basic Blister Packing Line
PROBLEM Static charges generated during unwinding and thermoforming will attract contamination. Manual packing lines are subject to contamination...
Read More
Blister Pill Packing
PROBLEM Static charges generated during unwinding and thermoforming will attract contamination. Any attracted contamination will become part of the...
Read More
Blow moulding – Parison alignment – limited space
PROBLEMWhere there is limited space between the extrusion heads and the top of the tooling, placing and ionising bar to control the static charges...
Read More
Bottle overwrapper
Wrapping & Contamination Problems with Bottle Overwrapper Wrap Machine PROBLEM There are 3 areas of concern with this type of packaging...
Read More
Bottle Powder Filling
PROBLEM Static charges generated during the conveying of bottles and vials will attract powders to the neck preventing sealing. Powders which are...
Read More
Bottle Tamper Seal
PROBLEM Tamper sleeve and bottle sleeving are prone to the sleeve not sitting in the correct position on the container. This is caused when the...
Read More
Cigarette overwrapper
Static control on cigarette packet over wrapper PROBLEM Static charges generated on the unwinding film builds up. The film is cut to length prior...
Read More
Horizontal bagging
Static control on horizontal bag filling machine PROBLEM Static charges generated on the unwinding film builds up. The film is formed into bags...
Read More
Injection moulding robot set down
PROBLEM Static charges on injection moulded components being stacked by a pick and place robot can result in Attraction of airborne...
Read More
Jetstream bottle drying
PROBLEM There are 4 areas of concern with this type of packaging machine: Wet undersides of cans cause problems when laser or ink jet printing...
Read More
Off-line die cutter
PROBLEM Static charges during unwinding will attract contamination from atmosphere and machine frames Separation of waste material from the...
Read More
Pallet Wrapper
Static Issues During Pallet Wrapping PROBLEM Pallet wrapping causes a few problems dependant on the product that’s being wrapped. Areas...
Read More
PDC Head Vial Cleaning
PROBLEM Nitrogen is used to clean and purge vials prior to filling. Static charges generated on the vials during conveying prevent the nitrogen from...
Read More
Pill Bottle Packing
PROBLEM Tablets are transported via vibrating feeders to drop through a counter to sit on slide gates. Static charges generated on the tablets cause...
Read More
Plastic bag pick and open
Automated aggregate bag filling PROBLEM Bags are picked off a stack by vacuum cups, placed on a second set of vacuum cups to open the bag neck,...
Read More
Polystyrene (EPS) tray stacking
PROBLEM Handling of polystyrene containers after forming and removal of waste can result in the containers when stacked falling over due to static...
Read More
Powder Sieving
PROBLEM Rewinding bags onto a roll the static charges built up on the material will cause the roll to balloon. This makes the roll larger and less...
Read More
Shrink sleeve
Static Control on Shrink Sleeving Preventing Label Alignment Issues PROBLEM Bottle sleeving is prone to the sleeve not sitting in the correct...
Read More
Shrinkwrap noodles
PROBLEM Horizontal over wrappers, wrap heat shrink film around a forming tube. Product passes through the inside of the tube in a continuous...
Read More
Silica Powder Hopper Filling
PROBLEM The friction generated by the silica travelling through the transfer pipes generates the static charges on the powder. Silica fills the...
Read More
Silo Bag Filling
Transfer of plastic components or granules to silo bag. PROBLEM During the transfer of plastic components or granules to a silo bag, static charges...
Read More
Stretchhood Wrapper
Static Control on Stretch Hood Palletiser Preventing Misfeeding PROBLEM The blocking in the material caused during the production of the lay-flat...
Read More
Tubular overwrapper
PROBLEM A high static charge is built up as the film unwinds and passes over various machines parts, rollers and web guides. This results in the...
Read More
Vertical form filling
Bag Sealing Problems In Vertical Form Fill & Seal Machines PROBLEM High static charges are generated when packaging film is fed from a wind off...
Read More
Vial Filling
PROBLEM Static charges generated on the vials from the conveyor results in liquid droplets being attracted to the vial closure, resulting in sealing...
Read More
Weighing Scales
PROBLEM Static charges on products being placed onto weighing scales, will produce incorrect measurements. Controlling the static charges is the...
Read More
Wicketer bag making
PROBLEM During the bag making process, there are many problems caused by static charges, or aided by applying a static charge. Area 1: Static...
Read More
