261v2 – BULKHEAD Ion Nozzle
Product Code: A261V2-32-BULKHEAD
Meech’s Model 261v2-Bulkhead Nozzle provides an easy way to inject ionised air into ducting or enclosures. Compressed air is connected using the 6mm push-fit inlet fitting. The nozzle is mounted through the wall of the duct or enclosure using a threaded boss, pushed through from the inside of the duct.
The nozzle is frequently used to neutralise materials in air-conveying systems to prevent blockages.
It is powered by a Meech Model 233v3, 977CM or 977v3 Pulsed DC Controller.
DownloadFeatures & Benefits
Optimisation of performance and extended ionisation range
Very effective in high speed applications
Easy to clean and replace. Minimum maintenance downtime and extended equipment life
Economical use of compressed air
Easy to locate and install in confined spaces
Technical Characteristics
6mm Inlet
Bulkhead fitting on outlet
PTFE
74mm
32mm
0.06kg (Without bracket)
100Psi (7 bar)
7 to 40Psi (0.5 to 3 bar)
Machined titanium (7mm)
0.8 sec at 150mm at 30 Psi (2 bar) (1000V to 100V)
Less than 0.01 ppm
+/- 9kV DC Nominal
+/- 10V or better at set up
Applications
Images
Related Products
261v2-¼ Ion Nozzle
Product Code: A261V2-32-1/4
Meech’s Model 261v2-1/4 Ion Nozzle is a small, robust in-line ioniser. ¼” bsp connections allow integration into existing plastic pipe work.
261v2 Ion Nozzle
Product Code: A261v2-32
The 261v2 Ion Nozzle is a small, robust ioniser, suitable for installation into machinery and equipment used within industrial and cleanroom environments.
261v2-¼OUT Ion Nozzle
Product Code: A261V2-32-1/4OUT
The 261v2-1/4OUT Ion Nozzle is a small in-line ioniser. 6mm push–fit connection and ¼” bsp outlet connection allow integration into existing plastic pipe work.
261v2 Flexi Nozzle
Product Code: A261V2-32-FLEX
The Meech Model 261v2 Flexi Nozzle is a small, lightweight ioniser with a 6mm push-fit inlet and an outlet extended by flexible knuckle trunking.
261v2-¼ Flexi Nozzle
Product Code: A261V2-32-FLEX-1/4
The Meech Model 261v2 -1/4 Flexi Nozzle is a small, lightweight ioniser with a ¼”bsp inlet and an outlet extended by flexible knuckle trunking.
Test Kit – 983v2 & 984v2
Product Code: 983V2-984V2-KIT
The 983v2 & 984v2 test kit allows diagnosis of static related issues and ionising equipment performance monitoring.
Must Haves
Switchmode Power Adaptor 15W
Product Code: A900IPS-SM2MS
Meech Offer a suitable Switchmode Power Adaptor for the Hyperion 924IPS, 924IPSv2, 314IPS, 960IPS, 971IPS-30 and 650QAC Bars.
DC High Voltage Cable Splitters
Product Code: A2WAY / A4WAY / A8WAY / A9WAY
DC High Voltage Cable Splitters enable a number of ionising products to be powered from the Meech Pulsed DC Controllers.
PulseDrive Lite PDC Controller
Product Code: APD15-LITE-00
The Hyperion PulseDrive Lite is an OEM-friendly controller with local status indication and a single pair of positive and negative HV outputs.
A single ioniser can be connected directly, or multiple ionisers connected using Meech HV splitters.
Also, being a Hyperion product, there is the ability to adjust output parameters via the use of a BarMaster or SmartControl Touch. SmartControl Touch compatibility also provides enhanced, integrated monitoring and control.
PulseDrive Plus PDC Controller
Product Code: APD15-PLUS-00
The Hyperion™ PulseDrive Plus is a static elimination controller that uses advanced pulsed DC technology to control Meech ionisers.
Firstly, a front-panel keypad provides local adjustment of parameters, allowing performance optimisation for output voltage up to 15kV, frequency for range, and balance for speed and accuracy. With adaptable parameters, PulseDrive ensures that any Meech DC ioniser can be setup and optimised to suit any requirement.
In addition, the PulseDrive Plus has many key features including LEDs to indicate operation status and ion current monitoring technology for greater control of the ionisation performance.
Furthermore, PulseDrive is compatible with our remote programmers, Hyperion™ BarMaster and Hyperion™ SmartControl Touch, enabling smarter and more effective static management.
Two pairs of HV outputs allow two ionisers to be connected, however with Meech HV Splitters, multiple ionisers can be connected.
Finally, the PulseDrive Plus is also available in two other versions for use in hazardous locations, PulseDrive Plus HL 5.5kV and PulseDrive Plus HL 9.0kV. These are ideal for use with our 924EX and 976EX Static Eliminator bars.
.
