Hyperion PulseDrive Plus HL 9.0kV

Product Code: APD-HL9.0KV-PLUS-00

The Hyperion PulseDrive Plus HL 9.0kV Pulsed DC Controller is a fully featured controller for end-users and high-end OEM applications to directly power up to two Meech 976EX Pulsed DC ionisers.

A front-panel membrane keypad provides local adjustment of parameters, and provides performance indication.  Two pairs of HV outputs allow direct connection of two Meech 976EX ionisers.  Multiple ionisers can be connected using Meech HV splitters.

The local keypad allows the PulseDrive Plus HL 9.0kV to be setup and optimised for use with the Meech 976EX ioniser, without the need for a BarMaster programmer. Also, being a Hyperion product, full BarMaster and SmartControl Touch compatibility is built-in as standard.

A key feature of the PulseDrive Plus HL 9.0kV is Meech’s Ion Current Monitoring technology which allows greater control of the ionisation performance, by monitoring the effectiveness of the ionising output. This is supported with integrated LED and output signals which alert operators of the need to clean the attached 976EX ioniser to achieve maximum performance.

  Download  
Features & Benefits
Dual Output

For direct connection of two ionisers, or more when using Meech HV splitters
Keypad & Numerical Display

For performance optimisation
Adjustable Output Voltage

±2–9.0kV
Adjustable Balance

For optimising output for speed or accuracy
Adjustable Frequency

For optimisation for different target distances
Remote ON / OFF

Allows HV Output to be remotely turned on/off via connection to volt-free contacts
LED Indicator

Cleaning alert and fault alert
Compatibility

Compatible with Meech remote programmers: BarMaster & SmartControl Touch
Technical Characteristics
Supply Voltage

24VDC (22-26VDC)
Electrical Connections

2x 4–Pin M8 & Earth terminal
Output Voltage

±2–9.0kV (default 9.0kV)
Output Current

Maximum 0.65mA
Output Balance

Adjustable 80:20 to 20:80 Pos:Neg (Default 54:46 Pos:Neg)
Output Frequency

BarMaster or keypad adjustable between 1-20Hz (Default 20Hz)
HV Outputs

Dual HV outputs
Electrical Consumption

15W Maximum
LED Indication

Green/Yellow/Red LED
Remote HT on/off

4-pin Female M8 connector
Hi/Lo Signals

Compatible with IEC 61131-2 types 1,2,3 plc inputs
Enclosure

FR ABS
Maximum Ambient Temperature

55°C
Protection Class

IP65 Construction
Dimensions (LxWxH mm)

141 x 97 x 51mm
Weight

600g
Compatible Products

976Ex
Images
Documentation

M0038 - Hyperion PulseDrive Controller - Operating Manual - REV2

Download  

M0039 - Hyperion PulseDrive Controller - Quick Start Guide - REV1

Download  
Related Products
976EX Hazardous Area Pulsed DC Bar

Product Code: 976EX

The Meech Model 976Ex has been designed to extend the benefits of the 976 Pulsed DC system to classified hazardous environments.

View Product

Hyperion PulseDrive Plus HL 9.0kV

Product Code: APD-HL9.0KV-PLUS-00

The Hyperion PulseDrive Plus HL 9.0kV Pulsed DC Controller is a fully featured controller for end-users and high-end OEM applications to directly power up to two Meech 976EX Pulsed DC ionisers.

A front-panel membrane keypad provides local adjustment of parameters, and provides performance indication.  Two pairs of HV outputs allow direct connection of two Meech 976EX ionisers.  Multiple ionisers can be connected using Meech HV splitters.

The local keypad allows the PulseDrive Plus HL 9.0kV to be setup and optimised for use with the Meech 976EX ioniser, without the need for a BarMaster programmer. Also, being a Hyperion product, full BarMaster and SmartControl Touch compatibility is built-in as standard.

A key feature of the PulseDrive Plus HL 9.0kV is Meech’s Ion Current Monitoring technology which allows greater control of the ionisation performance, by monitoring the effectiveness of the ionising output. This is supported with integrated LED and output signals which alert operators of the need to clean the attached 976EX ioniser to achieve maximum performance.

 

Features & Benefits
Dual Output For direct connection of two ionisers, or more when using Meech HV splitters
Keypad & Numerical Display For performance optimisation
Adjustable Output Voltage ±2–9.0kV
Adjustable Balance For optimising output for speed or accuracy
Adjustable Frequency For optimisation for different target distances
Remote ON / OFF Allows HV Output to be remotely turned on/off via connection to volt-free contacts
LED Indicator Cleaning alert and fault alert
Compatibility Compatible with Meech remote programmers: BarMaster & SmartControl Touch

Technical Characteristics
Supply Voltage 24VDC (22-26VDC)
Electrical Connections 2x 4–Pin M8 & Earth terminal
Output Voltage ±2–9.0kV (default 9.0kV)
Output Current Maximum 0.65mA
Output Balance Adjustable 80:20 to 20:80 Pos:Neg (Default 54:46 Pos:Neg)
Output Frequency BarMaster or keypad adjustable between 1-20Hz (Default 20Hz)
HV Outputs Dual HV outputs
Electrical Consumption 15W Maximum
LED Indication Green/Yellow/Red LED
Remote HT on/off 4-pin Female M8 connector
Hi/Lo Signals Compatible with IEC 61131-2 types 1,2,3 plc inputs
Enclosure FR ABS
Maximum Ambient Temperature 55°C
Protection Class IP65 Construction
Dimensions (LxWxH mm) 141 x 97 x 51mm
Weight 600g
Compatible Products 976Ex