PulseDrive Plus PDC Controller

Product Code: APD15-PLUS-00

The Hyperion™ PulseDrive Plus PDC Controller controls and powers Meech ionisers. Features include a front-panel keypad so operators can locally adjust parameters, allowing performance optimisation of the output voltage (up to 15kV), frequency for range, and balance for speed and accuracy to suit the requirement. The PulseDrive uses ion current monitoring technology to determine and provide performance status of the attached ionisers.

LEDs on the controller display operation status and users can turn the HV output on or off remotely via an external switch or volt-free contacts.

Two pairs of HV outputs allow users to connect two ionisers directly. For powering more than two ionisers from one PulseDrive, DC Splitters can be connected.

Furthermore, users can integrate the PulseDrive with our remote programmers Hyperion™ BarMaster or Hyperion™ SmartControl Touch.

Finally, we also offer the PulseDrive Plus PDC Controller in two other versions for use with products intended for hazardous locations, PulseDrive Plus HL 5.5kV and PulseDrive Plus HL 9.0kV. These are specifically designed for use with our 924EX and 976EX Static Eliminator bars.

  Download  
Features & Benefits
Dual Output

For direct connection of two ionisers or multiple ionisers with DC Splitters.
Keypad & Numerical Display

For performance optimisation.
LEDs

Indicate operational status.
Options

Hyperion™ SmartControl Touch and BarMaster Remote Programmer for optimal control.
Technical Characteristics
Construction

FR-ABS housing.
Environmental

55°C maximum temperature. IP65 construction.
Dimensions

141 x 97 x 51mm (L x W x H). Including bracket 141 x 118 x 55mm (L x W x H). Clearance of 150mm may be required for electrical connections.
Input Connection

4–pin male M8 connector.
Output Voltage

Adjustable ±2-15kV (default = 9.0kV) via the integrated keypad or via a connected Hyperion™ BarMaster Remote Programmer or Hyperion™ SmartControl Touch for even better performance.
Outputs

Dual HV outputs.
Output Frequency

Adjustable from 1-20Hz (default 20Hz) via the integrated keypad or via a connected Hyperion™ BarMaster Remote Programmer or Hyperion™ SmartControl Touch for even better performance.
Electrical Consumption

15W maximum.
Output Current

Maximum 625uA.
Weight

600g.
Balance

A balanced output can be adjusted from 80:20 to 20:80 in each polarity via the integrated keypad or via a connected Hyperion™ BarMaster Remote Programmer or Hyperion™ SmartControl Touch for even better performance.
Certification

CE and UL.
Remote Operation

On/Off via the 4-pin female M8 connector. Hi/Lo signals IEC 61131-2 compatible.
Options

Hyperion™ SmartControl Touch and Hyperion™ BarMaster Remote Programmer for optimal control.
Supply Voltage

24V DC.
Images
Static Elimination Controller
Static Elimination Controller
Documentation

Hyperion™ PulseDrive Controller Operating Manual

Download  

Hyperion™ PulseDrive Controller Quick Start Guide

Download  

PulseDrive Controller UL Certificate

Download  
Related Products
PulseDrive Lite PDC Controller PulseDrive Lite PDC Controller

Product Code: APD15-LITE-00

View Product
PulseDrive Plus HL 5.5kV PDC Controller PulseDrive Plus HL 5.5kV PDC Controller

Product Code: APD-HL5.5KV-PLUS-00

View Product
PulseDrive Plus HL 9.0kV PDC Controller

Product Code: APD-HL9.0KV-PLUS-00

View Product

PulseDrive Plus PDC Controller

Product Code: APD15-PLUS-00

The Hyperion™ PulseDrive Plus PDC Controller controls and powers Meech ionisers. Features include a front-panel keypad so operators can locally adjust parameters, allowing performance optimisation of the output voltage (up to 15kV), frequency for range, and balance for speed and accuracy to suit the requirement. The PulseDrive uses ion current monitoring technology to determine and provide performance status of the attached ionisers.

LEDs on the controller display operation status and users can turn the HV output on or off remotely via an external switch or volt-free contacts.

Two pairs of HV outputs allow users to connect two ionisers directly. For powering more than two ionisers from one PulseDrive, DC Splitters can be connected.

Furthermore, users can integrate the PulseDrive with our remote programmers Hyperion™ BarMaster or Hyperion™ SmartControl Touch.

Finally, we also offer the PulseDrive Plus PDC Controller in two other versions for use with products intended for hazardous locations, PulseDrive Plus HL 5.5kV and PulseDrive Plus HL 9.0kV. These are specifically designed for use with our 924EX and 976EX Static Eliminator bars.

 

Features & Benefits
Dual Output For direct connection of two ionisers or multiple ionisers with DC Splitters.
Keypad & Numerical Display For performance optimisation.
LEDs Indicate operational status.
Options Hyperion™ SmartControl Touch and BarMaster Remote Programmer for optimal control.

Technical Characteristics
Construction FR-ABS housing.
Environmental 55°C maximum temperature. IP65 construction.
Dimensions 141 x 97 x 51mm (L x W x H). Including bracket 141 x 118 x 55mm (L x W x H). Clearance of 150mm may be required for electrical connections.
Input Connection 4–pin male M8 connector.
Output Voltage Adjustable ±2-15kV (default = 9.0kV) via the integrated keypad or via a connected Hyperion™ BarMaster Remote Programmer or Hyperion™ SmartControl Touch for even better performance.
Outputs Dual HV outputs.
Output Frequency Adjustable from 1-20Hz (default 20Hz) via the integrated keypad or via a connected Hyperion™ BarMaster Remote Programmer or Hyperion™ SmartControl Touch for even better performance.
Electrical Consumption 15W maximum.
Output Current Maximum 625uA.
Weight 600g.
Balance A balanced output can be adjusted from 80:20 to 20:80 in each polarity via the integrated keypad or via a connected Hyperion™ BarMaster Remote Programmer or Hyperion™ SmartControl Touch for even better performance.
Certification CE and UL.
Remote Operation On/Off via the 4-pin female M8 connector. Hi/Lo signals IEC 61131-2 compatible.
Options Hyperion™ SmartControl Touch and Hyperion™ BarMaster Remote Programmer for optimal control.
Supply Voltage 24V DC.