PulseDrive Plus HL 5.5kV PDC Controller
Product Code: APD-HL5.5KV-PLUS-00
The Hyperion™ PulseDrive Plus HL 5.5kV PDC Controller controls and powers up to two Meech 924EX Static Eliminators. The 924EX is an outstanding static eliminator with ATEX certification, intended for use in hazardous areas. Features of the PulseDrive Plus HL 5.5kV include a front-panel keypad so operators can locally adjust the 924EX parameters, allowing performance optimisation of the output voltage (up to 5.5kV), frequency for range, and balance for speed and accuracy to suit the requirement. The PulseDrive uses ion current monitoring technology to determine and provide performance status of the attached ionisers.
LEDs on the controller display operation status and users can turn the HV output on or off remotely via an external switch or volt-free contacts.
Two pairs of HV outputs allow users to connect two 924EX ionisers directly. For powering more than two from one PulseDrive, DC Splitters can be connected.
Furthermore, users can integrate the PulseDrive with our remote programmers SmartControl™ Touch or BarMaster Remote Programmer.
Regardless of the application, users must position the PulseDrive Plus HL 5.5kV PDC Controller outside of the hazardous area.
Finally, we also offer the PulseDrive Plus in a 9.0kV version, specifically designed for use with our 976EX Static Eliminator bar.
DownloadFeatures & Benefits
For direct connection of two ionisers or multiple ionisers with Meech DC Splitters.
For performance optimisation.
Indicate operational status.
SmartControl Touch and BarMaster Remote Programmer for optimal control.
Technical Characteristics
FR-ABS housing.
On/Off via the 4-pin female M8 connector. Hi/Lo signals IEC 61131-2 compatible.
141 x 97 x 51mm (L x W x H). Including bracket 141 x 118 x 55mm (L x W x H). Clearance of 150mm may be required for electrical connections.
24V DC, 4–pin male M8 connector.
600g.
55°C maximum temperature. Controller must be situated outside the EX Zone .IP65 construction.
Adjustable ±2-5.5kV (default = 5.5kV) via the integrated keypad or via a connected SmartControl™ Touch or BarMaster Remote Programmer for even better performance.
15W maximum.
Adjustable from 1-20Hz (default 20Hz) via the integrated keypad or via a connected SmartControl™ Touch or BarMaster Remote Programmer for even better performance.
CE and UL.
A balanced output can be adjusted from 80:20 to 20:80 in each polarity via the integrated keypad or via a connected SmartControl™ Touch or BarMaster Remote Programmer for even better performance.
SmartControl Touch or BarMaster Remote Programmer for optimal control.
Images
