PulseDrive Plus HL 9.0kV PDC Controller
Product Code: APD-HL9.0KV-PLUS-00
The Hyperion™ PulseDrive Plus HL 9.0kV PDC Controller controls and powers up to two Meech 976EX Long-Range Ionising Bar. The 976EX is an outstanding static eliminator with ATEX certification, intended for use in hazardous areas. Features of the PulseDrive Plus HL 9.0kV PDC Controller include a front-panel keypad so operators can locally adjust the 976EX parameters, allowing performance optimisation of the output voltage (up to 9.0kV), frequency for range, and balance for speed and accuracy to suit the requirement. The PulseDrive uses ion current monitoring technology to determine and provide performance status of the attached ionisers.
LEDs on the controller display operation status and users can turn the HV output on or off remotely via an external switch or volt-free contacts.
Two pairs of HV outputs allow users to connect two 976EX ionisers directly. For powering more than two from one PulseDrive, DC Splitters can be connected.
Furthermore, users can integrate the PulseDrive with our remote programmers SmartControl™ Touch or BarMaster Remote Programmer.
Regardless of the application, users must position the PulseDrive Plus HL 9.0kV PDC Controller outside of the hazardous area.
Finally, we also offer the PulseDrive Plus in a 9.0kV version, specifically designed for use with our 924EX Short-Range Ionising Bar.
DownloadFeatures & Benefits
For direct connection of two ionisers or multiple ionisers with Meech DC Splitters.
For performance optimisation.
Indicate operational status.
SmartControl Touch and BarMaster Remote Programmer for optimal control.
Technical Characteristics
FR-ABS housing.
On/Off via the 4-pin female M8 connector. Hi/Lo signals IEC 61131-2 compatible.
141 x 97 x 51mm (L x W x H). With bracket: 141 x 118 x 55mm. Allow 150mm clearance.
24V DC, 4–pin male M8 connector.
600g.
Max 55 °C. Controller must be outside EX Zone. IP65 rated.
Adjustable ±2-9.0kV (default = 9.0kV) via keypad or SmartControl™/BarMaster.
15W maximum.
Adjustable from 1-20Hz (default 20Hz) via keypad or SmartControl™/BarMaster.
CE and UL.
Balanced output adjustable 80:20–20:80 via keypad or SmartControl™/BarMaster.
SmartControl Touch or BarMaster Remote Programmer for optimal control.
Images
