PulseDrive Plus HL 9.0kV PDC Controller
Product Code: APD-HL9.0KV-PLUS-00
The Hyperion™ PulseDrive Plus HL 9.0kV PDC Controller controls and powers up to two Meech 976EX Static Eliminators. The 976EX is an outstanding static eliminator with ATEX certification, intended for use in hazardous areas. Features of the PulseDrive Plus HL 9.0kV PDC Controller include a front-panel keypad so operators can locally adjust the 976EX parameters, allowing performance optimisation of the output voltage (up to 9.0kV), frequency for range, and balance for speed and accuracy to suit the requirement. The PulseDrive uses ion current monitoring technology to determine and provide performance status of the attached ionisers.
LEDs on the controller display operation status and users can turn the HV output on or off remotely via an external switch or volt-free contacts.
Two pairs of HV outputs allow users to connect two 976EX ionisers directly. For powering more than two from one PulseDrive, DC Splitters can be connected.
Furthermore, users can integrate the PulseDrive with our remote programmers Hyperion™ BarMaster or Hyperion™ SmartControl Touch.
Regardless of the application, users must position the PulseDrive Plus HL 9.0kV PDC Controller outside of the hazardous area.
Finally, we also offer the PulseDrive Plus in a 9.0kV version, specifically designed for use with our 924EX Static Eliminator bar.
DownloadFeatures & Benefits
For direct connection of two ionisers or multiple ionisers with Meech DC Splitters.
For performance optimisation.
Indicate operational status.
Hyperion™ SmartControl Touch and BarMaster Remote Programmer for optimal control.
Technical Characteristics
FR-ABS housing.
55°C maximum temperature. Controller must be situated outside the EX Zone .IP65 construction.
141 x 97 x 51mm (L x W x H). Including bracket 141 x 118 x 55mm (L x W x H). Clearance of 150mm may be required for electrical connections.
4–pin male M8 connector.
Adjustable ±2-9.0kV (default = 9.0kV) via the integrated keypad or via a connected Hyperion™ BarMaster Remote Programmer or Hyperion™ SmartControl Touch for even better performance.
Dual HV outputs.
Adjustable from 1-20Hz (default 20Hz) via the integrated keypad or via a connected Hyperion™ BarMaster Remote Programmer or Hyperion™ SmartControl Touch for even better performance.
15W maximum.
Maximum 625uA.
600g.
A balanced output can be adjusted from 80:20 to 20:80 in each polarity via the integrated keypad or via a connected Hyperion™ BarMaster Remote Programmer or Hyperion™ SmartControl Touch for even better performance.
CE and UL.
On/Off via the 4-pin female M8 connector. Hi/Lo signals IEC 61131-2 compatible.
Hyperion™ SmartControl Touch and Hyperion™ BarMaster Remote Programmer for optimal control.
24V DC.
Images
Related Products
Must Haves
976EX Hazardous Area Pulsed DC Bar
Product Code: 976EX
The Meech Model 976Ex has been designed to extend the benefits of the 976 Pulsed DC system to classified hazardous environments.
